Rainey Protective Gear

Fluid Resistant- Safeguard from Virus, Bacteria and Air Pollutants

 

 

For reference, COVID-19 coronavirus Particles measure 0.06-0.14 microns in size, but 5-10 microns when in droplets. 


Odoo image and text block

Five Layer Medical Grade Fabric

Rainey FM98 Face Mask   provides protection against environmental bacteria. The Rainey FM98 Mask is made with a five layer polypropylene

 

Protection 

 

For reference, COVID-19 coronavirus Particles measure 0.06-0.14 microns in size, but 5-10 microns when in droplets. 

 
The Polypropylene fabrics used to make Rainey’s protective masks were tested for Bacterial Filtration Efficiency and Differential Pressure (delta P) at Nelson laboratories per Standard Test Protocol Number: STP0004 Rev 12. The test method references the following standard Test Methods: ASTM F2102-14:2014 Test Method for Evaluating the Bacterial Filtration Efficacy
(BFE) of Medical Face Mask Materials, Using a Biological Aerosol of Staphylococcus aureus and BS EN 14683: 2014 Surgical Masks – Requirements and Test Methods.

The following test conditions and results were reported for the Medline sterilization material testing (reference Nelson Laboratories Study #: 865418-S01):
Test Conditions:
Test Side: Either Side
BFE Area Tested: ~40 cm2
BFE Flow Rate: 28.3 Liters per minute (L/min)
Delta P Flow Rate: 8 L/min
Conditioning Parameters: 85 ± 5% relative humidity (RH) and 21 ± 5°C for a minimum of 4 hours
Positive Control Average: 1.9 x 103 CFU
Negative Monitor Count: <1 CFU
Mean Particle Size (MPS): 3.0 μm